200 mm longer than standard lower shaft for SD/GP/GPX and others Standard length composite fibreglass upper shaft to replace the original aluminium type. Comes with the compression nut and o-ring. Sandy shaft spare compression nut and o-ring. Spare new style round Sandy shaft lower shaft rubbers. Plastic snap lock fits 16 mm shaft with 1/4" hole 605 mm total length. X-TERRA 705 upper shaft. black Kids sized 455 mm total length.
Shafts, shaft accessories p1
Requires a pair of lower rubbers to complete. Available in 3011-0141 kit. Store Equinox shaft kit will fit the GOLD MONSTER 1000 also
page 1 of 2
GA10 complete guidearm kit. GPZ7000 replacement lower shaft and hardware. Spare Minelab lower shaft rubbers. Ground balance switch suit GP3500 and GPX series detectors Suits SD/GP/GPX standard upper shafts 100 mm longer than standard lower shaft for SD/GP/GPX and others Spare Sandy shaft elliptical lower shaft rubbers.
Consumer Note; The Sandy Shaft blanks (tube assemblies) are purchased from a supplier in New Zealand as the Australian supplier we had manufacturing them closed down a couple of years ago. The threaded sections of the upper shafts and attachments points to the coil for the lower shafts are done in house in Australia, and the holes are drilled here as well. The compression nuts are also machined in house in Australia. The rubber the washers are cut from is purchased in Australia.
Mouse over images for more information. Click for larger image. Click button for details and item online store page.
$60.00
$66.00
$15.00
$44.00
$125.00
$3.00
$4.50
$3.00
$85.00
$2.50
$44.00
$44.00
$62.50
$73.00
$85.00
$18.50
$40.00
Minelab lower shaft
Sandy shaft composite
Sandy shaft 700 lower
Sandy shaft 800 lower
Sandy shaft nut and o-ring
Sandy shaft new washers
Sandy shaft old washers
Minelab shaft washers
Gold Monster Equinox kit
Push button snap lock
X-Terra short lower shaft
X-Terra std lower shaft
X-Terra upper shaft
GPZ7000 GA10 guide arm
GPZ7000 lower shaft
Minelab twist lock
Green button and wiring
Compression nut end. Compression nut and o-ring. Spare lower shaft rubbers. Plastic snap lock. 605 mm total length. X-TERRA 705 upper shaft. black 455 mm total length.
Shafts, shaft accessories p1
Standard lower shaft. Store Equinox shaft kit will fit the GOLD MONSTER 1000
page 1 of 2
GA10 complete guidearm kit. GPZ7000 replacement lower shaft and hardware. Spare lower shaft rubbers. Ground balance switch suit GP3500 and GPX series detectors Suits SD/GP/GPX standard upper shafts 200 mm longer than standard lower shaft for SD/GP/GPX and others 100 mm longer than standard lower shaft for SD/GP/GPX and others Spare Sandy shaft elliptical lower shaft rubbers.
Consumer Note; The Sandy Shaft blanks (tube assemblies) are purchased from a supplier in New Zealand as the Australian supplier we had manufacturing them closed down a couple of years ago. The threaded sections of the upper shafts and attachments points to the coil for the lower shafts are done in house in Australia, and the holes are drilled here as well. The compression nuts are also machined in house in Australia. The rubber the washers are cut from is purchased in Australia.
Mouse over images for more information. Click for larger image. Click button for details and item online store page.
$44.00
$125.00
$60.00
$66.00
$15.00
$3.00
$4.50
$3.00
$2.50
$44.00
$85.00
$44.00
$62.50
$73.00
$85.00
$18.50
$40.00
Minelab lower shaft
Sandy shaft composite
Sandy shaft 700 lower
Sandy shaft 800 lower
Sandy shaft nut and o-ring
Sandy shaft new washers
Sandy shaft old washers
Minelab shaft washers
Gold Monster Equinox kit
Push button snap lock
X-Terra short lower shaft
X-Terra std lower shaft
X-Terra upper shaft
GPZ7000 GA10 guide arm
GPZ7000 lower shaft
Minelab twist lock
Green button and wiring