|
|
Beach and |
Treasure equipment |
|
|
|
Garrett's plastic sand scoop for retrieving targets on the beach, has a series of holes in the rear and bottom to allow the sand to sift through.
Part number - 1600971
RRP $29.00 |
|
Garrett's metal sand scoop for beach target retrieval.
Part number - 1600970
RRP $49.00 |
|
|
|
|
|
|
|
Garrett's Stainless steel sand scoop is the ultimate beach detecting scoop.
Part number - 1600900
RRP $70.00 |
|
Garrett's Treasure Digger Kit includes a pouch, probe and composite digger in one kit.
Part number - 160170
RRP $30.00 |
|
|
|
|
|
|
|
Garrett's Treasure Digger is a tough Polymer material with depth marks to gauge the depth of your target when retrieved.
Part number - 160600
RRP $10.00 |
|
Garrett's Treasure Probe is for locating your target without damaging it. The 9" long steel probe is poked into the ground to "feel" the target.
Part number - 1605800
RRP $11.00
|
|
|
|
|
|
|
|
Garrett's Stainless steel Treasure Trowel is 10" long (250mm) with a non-slip handle, and marked on the inside in inches and centimeters.
Part number - 1606100
RRP $18.00 |
|
Garrett's Treasure Pouch will fit on your belt and house your digging tools in the 4 internal pockets and a velco fastener to keep them in place. Pocket measures approximately 200mm x 150mm x 60mm.
Part number - 160880
RRP $12.00 |
|
|
Melting |
Gold |
|
|
|
Comparison image showing the 3 size clay crucibles we stock using a standard size ball point pen as a guide. |
|
This small crucible has a capacity of up to 100 grams of gold and measures 50mm x 50mm x 22mm high.
Part number - Crucible small
RRP $10.95 |
|
|
|
|
|
|
|
This medium crucible has a capacity of up to 300grams of gold and measures
70mm x 70mm x 22mm high.
Part number - Crucible medium
RRP $11.30 |
|
The largest crucible has a capacity of up to 1Kg of gold and measures
100mm x 100mm x 32mm high.
Part number - Crucible large
RRP $22.00 |
|
|
|
|
|
|
|
This crucible holder will hold all of the above sizes and is the shot to hold the crucible and pour your gold into your selected mould.
Part number - Crucible holder
RRP $109.30
|
|
|
|
|
Assorted Rock |
Tools , Scoop |
|
|
|
Cleaning out those cracks in the creek and gully bottoms is easier with this crevicing tool. Light and convenient, it has a wider end and a handle to grip onto.
|
|
This Deluxe crevicing tool has a curved end and a mini scoop on the other. Scraping out cracks and divots on the bedrock is what it is useful for.
RRP $25.00 |
|
|
|
|
|
|
|
Need a Geo pick, or a rock pick? This ecomony unit is for you. Break open those annoying hotrock or look inside a rock for treasures.
RRP $17.00
|
|
Made from tough ABS plastic, this scoop stops those smaller nuggets from slipping through your fingers, also stopping thorns and uninvited insect guests from causing injury, and makes target recovery a little easier.
Part number - SCP
RRP $14.50
|
|
|
Gold |
Magic |
|
|
|
The manual powered Gold Magic goldwheel can also be used with or without water and makes the job of panning down your concentrates easy. The material is added to the bottom of the wheel and the manual handle turns it, bringing your gold into the centre cup. This is a more economic version to the powered unit.
Part number - P01-0010
RRP $400.00 |
Image is of the manual unit with the hand crank handle. |
The Gold Magic goldwheel can be used with or without water and makes the job of panning down your concentrates easy. The material is added to the bottom of the wheel and the electric motor turns it, bringing the gold into the centre cup.
Part Number - P01-0009
RRP $800.00
|
|
|
Pick |
Holders |
|
|
|
Coiltek Camo coloured material pick holder with a steel insert. This will fit onto a 50mm (2") wide belt.
Part number P03-0008
RRP $15.00 |
|
Here is an angled pick holder that clips onto the Minelab harness or a backpack with 2 metal clips, and holds the pick at an angle away from your legs. Made from thick leather it is easily removeable for when you might want to go to a very large coil like an 18" mono.
Part number - MD17
RRP $39.00 |
|
|
|
|
|
|
|
|
|
This pick holder is similar to the above unit, but is able to be threaded onto a belt. It holds the pick at an angle to your body so as not to interfere with your legs while walking.
Part number - MD010
RRP $35.00 |
